Method

A screen turns public data and your inputs into a buildable area, a unit or square foot count, and a pro forma. Every step below runs as plain code in your browser. The same inputs always give the same answer.

Data sources

  • Parcels. City of Greenville GIS parcels inside city limits (current). Elsewhere in the county, a February 2026 county parcel extract where it covers the point, then a 2019 full-county extract. Both extracts are copies hosted on ArcGIS Online by third parties, and owner names are as of their dates. The screen names the source it used. Older lines can miss later splits, so check the tax map before relying on them.
  • Address search. The Greenville County address locator, then the U.S. Census geocoder. Parcel numbers search the parcel layers directly.
  • Jurisdiction. U.S. Census TIGERweb incorporated places decide whether the City of Greenville, another town, or the county zones the parcel.
  • Zoning districts. The City of Greenville zoning map inside the city. Elsewhere, a copy of the Greenville County zoning map hosted on ArcGIS Online by a third party, last edited October 2025, plus county overlay districts. The same copy stands in for the city map when the city server does not answer. Confirm the district with the planning office.
  • Flood. FEMA National Flood Hazard Layer, flood hazard zones. Special flood hazard areas (zones A, AE, AH, AO, and V) and floodways are drawn.
  • Wetlands. U.S. Fish and Wildlife Service National Wetlands Inventory.
  • Demographics. U.S. Census Bureau ACS 2024 5-year estimates for 1,028 block groups in Greenville and the nine counties around it, located by Census internal points.

Buildable area

  1. The parcel outline is projected to South Carolina State Plane (EPSG 2273), in feet, so distances and areas are true.
  2. Each edge of the outline is classed. The front edge is the one you tap on the map, or the longest edge until you do. Edges facing within 45 degrees of the front direction are front edges. Edges facing within 60 degrees of the opposite direction are rear edges. The rest are side edges.
  3. Every point closer to an edge than that edge's setback is removed. This is the exact setback envelope, including rounded inside corners.
  4. Flood hazard areas and mapped wetlands are removed next, each behind its own switch.
  5. What remains is the net buildable area. The map fills it in the accent color.

Test cases ship with the code. A 200 by 300 foot lot with a 20 foot setback on every side returns 41,600 square feet, the exact answer.

Single-family yield

A subdivision starts from the whole parcel less excluded flood and wetland areas, because each lot carries its own setbacks inside its lines. A share of that land goes to streets, right of way, stormwater, and open space. The rest is divided into lots.

  • Lots by lot size = land left for lots / minimum lot size. When no minimum is on file, the screen uses 10,000 sf and says so.
  • Lots by density = density limit x gross acres.
  • The smaller count is the yield, and the screen names the limit that set it.
  • Sell finished lots: revenue = lots x finished lot value. Cost = lots x development cost per lot, plus soft cost.
  • Build and sell homes: revenue = homes x sale price. Cost = lot development, plus home size x build cost, plus soft cost, plus sales and closing cost.
  • Land can carry = revenue - cost before land - developer margin on revenue.

Multifamily yield

The unit count is the smallest of four limits. The screen names the one that binds.

  • Density: units per acre times gross acres.
  • Floor area ratio: FAR times site area, divided by the gross area per unit (unit size divided by efficiency).
  • Lot coverage: coverage times site area, divided by the building footprint per unit.
  • Room on the site: the buildable area less the share kept for drives and open space, divided by the land each unit needs: its footprint (gross area per unit divided by stories) plus its parking (spaces per unit times the area of one stall).

Stories are your choice, capped by the story limit and by the height limit divided by the floor to floor height. Parking is surface parking.

Pro forma and land value

  • Gross potential rent = units x (rent + other income) x 12.
  • Effective gross income = gross potential rent x (1 - vacancy).
  • Net operating income = effective gross income x (1 - operating expense ratio).
  • Hard cost = gross sf x cost per gross sf, plus parking stalls x cost per stall.
  • Soft cost = hard cost x soft cost percent.
  • Value = net operating income / cap rate.
  • Residual land value = value / (1 + return on cost) - cost before land. This is the most the land can carry while the project still earns your return.
  • Yield on cost = net operating income / cost, shown before land and, when you enter a price, with land.

The report

The report runs all three uses on the same parcel: single-family lots, single-family homes, and apartments. It names the use with the highest residual land value among the uses the district allows. When you enter a land price, it compares that price with what the land can carry. The land bar splits the parcel into buildable area, setback strips, flood hazard area, and wetland.

Market rings

A block group counts toward a 1, 3, or 5 mile ring when its Census internal point is inside the ring. Population, households, and renter households are sums. Medians cannot be summed, so income and rent are averages of block group medians weighted by households and renter households.

Zoning limits on file

Each limit was read from the official ordinance text and stored with its section and a verbatim quote. A build check fails if any quote is missing from the saved source text. Limits that could not be confirmed are marked not on file, and the screen asks you for them.

JurisdictionDistrictsCore limits sourced
Unincorporated Greenville County27144 of 162
City of Greenville2599 of 150

Core limits are the three setbacks, height, density, and parking per unit.

Unincorporated Greenville County districts

R-M2 (Multifamily Residential District), R-M4 (Multifamily Residential District), R-M5 (Multifamily Residential District), R-M6 (Multifamily Residential District), R-M7 (Multifamily Residential District), R-M8 (Multifamily Residential District), R-M10 (Multifamily Residential District), R-M12 (Multifamily Residential District), R-M14 (Multifamily Residential District), R-M16 (Multifamily Residential District), R-M20 (Multifamily Residential District), R-MA (Multifamily Residential District), NC (Neighborhood Commercial District), POD (Planned Office District), C-1 (Commercial District), C-2 (Commercial District), C-3 (Commercial District), S-1 (Services District), I-1 (Industrial District), PD (Planned Development District), R-S (Residential Suburban District), R-20 (Single-Family Residential District), R-15 (Single-Family Residential District), R-12 (Single-Family Residential District), R-10 (Single-Family Residential District), R-7.5 (Single-Family Residential District), UNZONED (unincorporated, no zoning district)

City of Greenville districts

RH-A (House A), RH-B (House B), RH-C (House C), RH-D (House D), RN-A (Neighborhood A), RN-B (Neighborhood B), RNX-B (Neighborhood Flex B), RN-C (Neighborhood C), RNX-C (Neighborhood Flex C), RC-2 (Community 2), RC-3 (Community 3), RC-5 (Community 5), MX-2 (Mixed Use 2), MX-3 (Mixed Use 3), MX-5 (Mixed Use 5), MX-D (Mixed Use Downtown), MXS-2 (Shopfront 2), MXS-3 (Shopfront 3), MXS-D (Shopfront Downtown), BG (Business General), BH (Business Heavy), IX (Industrial Flex), IG (Industrial General), CM (Campus), PD (Planned Development)

Default assumptions

Every default can be changed on the screen. Values marked assumption are judgment calls informed by the source shown.

Multifamily

InputDefaultBasis
Average rent per unit $1,339 per unit/mo Source
Other income per unit $75 per unit/mo Assumption, see source
Average unit size 954 sf Source
Net-to-gross efficiency 85 % Assumption, see source
Hard cost, garden-style wood frame $160 per gsf Assumption, see source
Operating expense ratio 35 % Assumption, see source
Surface parking per stall, with aisles 325 sf Assumption, see source
Soft costs 25 % of hard cost Assumption
Floor to floor height 10.5 ft Assumption
Share of envelope for drives and open space 25 % Assumption
Surface parking cost per stall $5,000 per stall Assumption
Developer return on cost 15 % Assumption
Stories 3 stories Assumption

Single-family

InputDefaultBasis
Finished lot value $70,000 per lot Assumption, see source
Lot development cost $40,000 per lot Assumption, see source
Roads, right-of-way and open space 25 % Assumption, see source
Average new-home sale price $360,000 Assumption, see source
Average home size 2,000 sf Assumption, see source
Vertical build cost $110 per sf Assumption, see source
Sales and closing costs 5 % Assumption, see source
Soft costs 11 % Assumption, see source
Developer or builder profit 11 % Source
Absorption 2.4 lots/mo Source

Multifamily, market

InputDefaultBasis
Cap rate, multifamily 5.8 % Source
Vacancy and credit loss 5 % Assumption, see source

What the AI does

Code computes every number. The AI has two jobs, and code checks each one.

  • Reading zoning text. You paste ordinance text, and the model returns each limit with the sentence it came from. Code keeps a limit only when that sentence is in your text word for word, contains the number, names the limit, and the number falls in a plausible range. Nothing changes until you apply it.
  • Drafting a memo. The model writes three paragraphs from the summary facts. Code compares every number in the draft to the facts and discards the draft if any number does not match.

Both use Cloudflare Workers AI. Requests are limited per visitor per hour.

Limits of a screen

A screen is a first look. It is not an appraisal, survey, engineering study, legal opinion, or zoning determination. Tax map lines are approximate, and a boundary survey sets the exact lines. Flood and wetland maps are approximate, and a site visit or delineation can find more or less. Utilities, access, slope, soils, stormwater, buffers, and conditional approvals are not modeled. Confirm every number with the planning office and licensed professionals before you buy or build.