All Greenville zoning districts
I-1 zoning in Greenville County
Industrial District, Unincorporated Greenville County
I-1 does not list detached single-family homes as a use. Apartments need a rezoning.
- Minimum lot
- None set
- Density limit
- None set
- Front setback
- 50 ft
- Height limit
- 90 ft
What a parcel in I-1 holds
I-1 sets no minimum lot size or density cap the screen can count from, so the yield comes from the building form: setbacks, height, coverage, and parking. Screen a parcel to test it with your own limits.
Uses
| Use | Status | Source |
|---|---|---|
| Single-family homes | Needs rezoning | Table 6.1 (row: Dwelling - single-family detached) |
| Apartments | Needs rezoning | Table 6.1 (row: Dwelling - multiple-family) |
Limits
| Limit | Value | Source and notes |
|---|---|---|
| Minimum lot size | None | Single-family detached dwellings are not permitted in this district. |
| Minimum lot width | None | Single-family detached dwellings are not permitted in this district. |
| Density limit | None | Multifamily not permitted in this district. |
| Dwellings per lot | None | The county ordinance sets density per acre. |
| Front setback | 50 ft | Table 7.3 |
| Side setback | 25 ft | Sec. 7:3.10Railroad-adjacent exception in Sec. 7:3.10. |
| Rear setback | 25 ft | Sec. 7:3.10 |
| Height limit | 90 ft | Table 7.3Sec. 7:3.7 lets buildings exceed the district height if side and rear yards increase 1 foot for each 3 feet of extra height. |
| Story limit | None | The County Zoning Ordinance regulates height in feet only; no story limit found in Table 7.3/7.4. |
| Lot coverage limit | None | No maximum lot coverage standard for this district found in Articles 5 and 7 of the County Zoning Ordinance; site yield is set by setbacks, parking, buffers and stormwater. |
| Floor area ratio limit | None | The County Zoning Ordinance has no floor area ratio standard (searched the full text). |
| Parking per apartment | None | Multifamily not permitted in this district. |
Screen a parcel zoned I-1
Search an address or parcel number. The screen loads the parcel, finds its district, removes setbacks, flood zones, and wetlands, and counts lots and apartments with these limits.
Other Greenville County districts
Limits from the Greenville County Zoning Ordinance, read November 20, 2026. Source document. Ordinances change and overlays can add limits. Confirm the district and its limits with Greenville County Zoning Administration before you rely on them.